近日有對我們提到，杭州一家公司通過冷鐓（也可稱為冷精鍛）技術，將人形機器人絲杠的運行壽命提升到了真正可用級別，成本公攤也有望降到可用范圍。

　　Recently, an expert mentioned to us that a company in Hangzhou has improved the operating life of humanoid robot screws to a truly usable level through cold heading (also known as cold precision forging) technology, and the cost sharing is expected to be reduced to a usable range.

　　目前，人形機器人有兩個部位主要用到絲杠，分別是腿部線性執行器和靈巧手，前者多采用反向行星滾柱絲杠，后者則多用微型滾珠絲杠，兩者精度要求都不算低，在原先，市場上大多靈巧手用的微型滾珠絲杠，多是由磨床制造，設備要求較高，精密加工和裝配的要求也高，大多企業單位生產時間達數十分鐘，能保證余量、精度、效率都能滿足的企業少之又少，大多終生產的絲杠產品運行壽命普遍就僅20?萬次，對于落地而言成本過高，因?yàn)檫@意味著如果人形機器人每天在工廠干?12?小時，每分鐘抓放?10?次工件，約拉升約7200?次，20?萬次晚1?個月就會報廢更換。

　　At present, there are two main parts of humanoid robots that use screws, namely leg linear actuators and dexterous hands. The former mostly uses reverse planetary roller screws, while the latter mostly uses micro ball screws, both of which have high accuracy requirements. In the past, most of the micro ball screws used by dexterous hands in the market were manufactured by grinding machines, with high equipment requirements and high precision machining and assembly requirements. Most enterprises have a production time of tens of minutes per unit, and few can ensure that the margin, accuracy, and efficiency can be met. Most of the final produced screw products generally have a service life of only 20? Ten thousand times, the cost is too high for landing, because it means that if humanoid robots work in factories every day? 12 hours, catch and release every minute? 10 pieces per day, approximately 7200 pieces per day? Next time, 20? Ten thousand times at the latest? It will be scrapped and replaced within a month.

　　反向行星滾珠絲杠運行架構是螺母帶絲杠運行，因此設計上難度在于需要緊湊適配機器人關節、制造公差小、可傳大載荷扭矩，而且球軸承隨著磨損精度衰減問題較為明顯，動態響應滯后，加之加工慢、產量低，行星滾柱絲杠的精度等級從P0?到?P7，P0?，人形機器人大多得需要P5?級精度，P5?級對應?ISO?標準的?C5?級，指的是?300?毫米行程誤差在±0.01?毫米內。

　　The operating architecture of the reverse planetary ball screw is nut with screw operation, so the difficulty in design lies in the need for compact adaptation of robot joints, small manufacturing tolerances, and the ability to transmit large load torque. In addition, the ball bearing has a significant problem of accuracy degradation with wear, and the dynamic response lags behind. In addition, the processing is slow and the output is low. The accuracy level of the planetary roller screw ranges from P0? To? P7，P0? Most humanoid robots require P5 level precision, which corresponds to P5 level accuracy? ISO? Standard? C5 level, what does it mean? 300? Is the millimeter stroke error within ± 0.01? Within millimeters.

　　因此業界傳聞部分企業據稱放棄線性執行器方案改用旋轉式方案，或者較為可行的方案是將滾珠絲杠替換為行星滾柱絲杠，因?yàn)橥染瘸叽绲男行菨L柱絲杠的壽命遠高于滾珠絲杠，但目前行星滾柱絲杠的應用難點在于加工難度高、加工效率低和成本高，因此如何降本將成為未來重要課題，冷鐓工藝有望解決微型行星滾柱絲杠成本問題。

　　Therefore, there are rumors in the industry that some companies have abandoned linear actuator solutions and switched to rotary solutions, or a more feasible solution is to replace ball screws with planetary roller screws, because planetary roller screws of the same precision size have a much longer lifespan than ball screws. However, the current application difficulties of planetary roller screws lie in high processing difficulty, low processing efficiency, and high cost. Therefore, how to reduce costs will become an important issue in the future, and cold heading technology is expected to solve the cost problem of micro planetary roller screws.

　　▍絲杠冷鐓工藝是個新思路？

　　Is the cold heading process for lead screws a new idea?

　　9月24日，新坐標發布冷鐓工藝微型行星滾柱絲杠，精度可達C3，絲杠齒形一次成形精度可達IT4?級，效率5min/根（高于市面平均效率5-10倍）。而且目前手部微型絲杠加工已經成熟，產品送樣中，公司稱正在研發冷鐓工藝腿部大絲杠，而且絲杠滾壓工藝迎來突破進展，布局循環式、反向式大小滾珠絲杠，預計十月底推出0.5mm及7.5mm導程絲杠，靜荷載500N、20000N，充分驗證冷鍛工藝技術路徑的可行性。

　　On September 24th, New Coordinates released a micro planetary roller screw with cold heading technology, with an accuracy of C3 and a one-time forming accuracy of IT4 for the screw tooth profile? Grade, efficiency of 5 minutes per root (5-10 times higher than the market average efficiency). And currently, the processing of hand micro screws has become mature. In the product sample submission process, the company claims to be developing cold heading technology for leg large screws, and the screw rolling technology has made breakthrough progress. The layout includes circular and reverse sized ball screws. It is expected to launch 0.5mm and 7.5mm lead screws with static loads of 500N and 20000N by the end of October, fully verifying the feasibility of the cold forging process technology path.

　　新坐標成立于2002?年，總部位于杭州市余杭區倉前工業園，是國內精密冷鍛件制造的龍頭企業，于?2017?年在上交所主板上市。該公司早是深耕汽車零部件制造，采用冷鐓工藝技術打造類似產品，積極開拓汽車變速器、精密電磁閥、空心電機軸、動力電池殼體精密零部件、絲杠精密零部件，以及不銹鋼精密冷鍛制品等多個高附加值領域。

　　The new coordinates were established in 2002? In the year, headquartered in Cangqian Industrial Park, Yuhang District, Hangzhou City, it is a leading enterprise in precision cold forging manufacturing in China? 2017? Listed on the main board of the Shanghai Stock Exchange in the year. The company was originally deeply involved in the manufacturing of automotive parts, using cold heading technology to create similar products, actively exploring multiple high value-added fields such as automotive transmissions, precision solenoid valves, hollow motor shafts, precision components for power battery casings, precision components for lead screws, and stainless steel precision cold forging products.

　　冷鐓成形鍛造是指利用鍛壓機械對金屬坯料施加壓力，使金屬坯料產生塑性變形，以獲得具有一定機械性能、形狀和尺寸鍛件的一種加工工藝，目前主要有三種生產模式，分別是分序冷精鍛、多工位冷精鍛、單工位多動作冷精鍛。國內普遍采用分序冷精鍛。新坐標采用的模式則是多工位冷精鍛成形技術。多工位冷精鍛成形技術就是選擇合適的金屬坯料放置在冷鍛機上，施加高壓力將其壓入模具中成型，每次成型一部分，在多個工位上分次擠壓，形成所需的形狀和尺寸。

　　Cold heading forging refers to a processing technology that uses forging machinery to apply pressure to metal billets, causing plastic deformation of the metal billets to obtain forgings with certain mechanical properties, shapes, and sizes. Currently, there are three main production modes, namely sequential cold precision forging, multi station cold precision forging, and single station multi action cold precision forging. Sequential cold precision forging is commonly used domestically. The new coordinate adopts a multi station cold precision forging forming technology. The multi station cold precision forging technology is to select suitable metal billets and place them on the cold forging machine, apply high pressure to press them into the mold for forming, forming a part each time, and extruding them in multiple stations to form the desired shape and size.

　　因?yàn)闈L柱絲杠主要由絲杠軸、螺母、滾珠以及循環部件組成，傳統絲杠加工工藝為先用車床做粗加工，再用磨床做精磨，此種工藝能夠保證精度但效率極低；為追求效率提升，產業研發出通過以車代磨（即車床直接車削，不需要精磨）直接加工，此種工藝效率高，但目前精度存在上限。因此在機器人腿部的反向式行星滾柱絲杠，業界關注的焦點在于絲杠精度，若精度要求較高，則必須在粗加工后加一道精磨工藝；若精度要求一般（C5左右），則以車代磨將是性價比更高的工藝。

　　Because the roller screw is mainly composed of the screw shaft, nut, ball, and circulating components, the traditional screw machining process is to first use a lathe for rough machining, and then use a grinder for fine grinding. This process can ensure accuracy but has extremely low efficiency; In order to pursue efficiency improvement, the industry has developed a process that uses turning instead of grinding (i.e. turning directly with a lathe without precision grinding) for direct processing. This process has high efficiency, but there is currently an upper limit to accuracy. Therefore, in the reverse planetary roller screw of robot legs, the industry's focus is on the accuracy of the screw. If high accuracy is required, a precision grinding process must be added after rough machining; If the accuracy requirement is average (around C5), then replacing grinding with a car will be a more cost-effective process.

　　在汽車界，冷鐓技術壁壘相對高，覆蓋材料、模具、設備等全產業鏈技術，絲杠用冷精鍛成型技術的優勢在于，能夠快速成型螺母和絲杠軸，可以減少在切削加工時形成金屬廢屑，減少原材料損耗，節約原材料成本，此外冷精鍛生產的工件形狀和尺寸容易控制，可以避免高溫導致的外形誤差，表面質量和精度較高。可以說冷鐓工藝兼具加工效率高、材料損耗率低、綠色等優點，近年來在汽車零部件加工方案的滲透率逐步提升，所以冷鐓工藝也被認為是靈巧手微型絲杠重要降本方案。

　　In the automotive industry, cold heading technology has relatively high barriers, covering the entire industry chain technology such as materials, molds, and equipment. The advantage of cold precision forging technology for lead screws is that it can quickly form nuts and lead screw shafts, reduce the formation of metal chips during cutting, reduce raw material consumption, and save raw material costs. In addition, the shape and size of workpieces produced by cold precision forging are easy to control, which can avoid shape errors caused by high temperatures, and have high surface quality and accuracy. It can be said that cold heading technology has the advantages of high processing efficiency, low material loss rate, and green environmental protection. In recent years, the penetration rate of automotive parts processing solutions has gradually increased, so cold heading technology is also considered an important cost reduction solution for dexterous hand micro screws.

　　▍新坐標強在哪？

　　Where is the strength of the new coordinates?

　　新坐標在設備端自研自制內螺紋滾壓設備及熱成型設備，同時通過引進國際的多工位冷鐓機，結合公司長期積累的“平板卷制”工藝，能夠完成冷鐓加工，材料利用率達?91%，遠高于行業平均的?65%，成本直降?42%，而且內螺紋可3～5分鐘成型C3精度，內螺紋設備成本僅幾十萬。

　　New Coordinates has independently developed and manufactured internal thread rolling equipment and hot forming equipment on the equipment side. At the same time, by introducing internationally advanced multi station cold heading machines and combining them with the company's long-term accumulated "flat plate rolling" process, it can efficiently complete cold heading processing with a material utilization rate of up to? 91%, much higher than the industry average? 65%, cost reduction? 42%, and the internal thread can be molded with C3 precision in 3-5 minutes, with a cost of only a few hundred thousand yuan for internal thread equipment.

　　有消息稱其給三花智控提供的汽車熱管理項目里的閥芯閥柱就采用類似工藝，10月底可做好5臺，月產能達2萬套，從而已經使得原材料使用量下降，且用冷凍的工藝生產，大大提高生產效率，明年3月底達到3萬套，明年12月底達到4萬套，根據客戶需求擴產能周期為3個月，從而能為客戶降本增效。

　　It is reported that the valve core and valve column in the automotive thermal management project provided to Sanhua Intelligent Control will use a similar process. By the end of October, 5 units can be produced, with a monthly production capacity of 20000 sets, which has already reduced the use of raw materials. In addition, the production process will be frozen, greatly improving production efficiency. By the end of March next year, the production capacity will reach 30000 sets, and by the end of December next year, it will reach 40000 sets. According to customer demand, the production capacity expansion cycle is 3 months, which can reduce costs and increase efficiency for customers.

　　近年來，公司開始將業務拓展汽車發動機以外的領域，開始涉足汽車用駐車絲杠&機器人用絲杠領域的研發和制造，有望打造第二成長曲線。2025年4月29日，新坐標聯合浙江陀曼智能（專攻高端磨床及智能制造）成立杭州九月八精密傳動，持股77%，聚焦?jié)L柱絲杠、滾珠絲杠生產。公司積極布局全球市場，在歐洲（捷克）、北美（墨西哥）設立制造基地，隨著海外工廠陸續投產，公司業績持續增長，展現出較強的盈利能力和國際競爭力。

　　In recent years, the company has begun to expand its business beyond automotive engines, entering the research and manufacturing of parking screws for automobiles and screws for robots, and is expected to create a second growth curve. On April 29, 2025, New Coordinates partnered with Zhejiang Tuoman Intelligent (specializing in high-end grinding machines and intelligent manufacturing) to establish Hangzhou September 8th Precision Transmission, holding 77% of the shares, focusing on the production of roller screws and ball screws. The company actively expands its global market by establishing manufacturing bases in Europe (Czech Republic) and North America (Mexico). With the continuous production of overseas factories, the company's performance continues to grow, demonstrating strong profitability and international competitiveness.

　　憑借全球化布局和深耕，公司業績保持穩健增長，2020-2024年收入CAGR=16.0%，其中24年海外收入實現同比+47%，海外收入占比從2020年的17%迅速提升2024年的43%，客戶方面綁定歐洲大眾、通用等高端客戶。

　　With a global layout and deep cultivation, the company's performance has maintained steady growth, with a CAGR of 16.0% in revenue from 2020 to 2024. Among them, overseas revenue achieved a year-on-year increase of 47% in 24 years, and the proportion of overseas revenue rapidly increased from 17% in 2020 to 43% in 2024. The customer side is bound to high-end customers such as Volkswagen and General Motors in Europe.